; STUART OLSON CONST. CO. CUSTOMIZATION ; from: Master American Language file ; 11 April 1990 ; ; Tom Jennings ; Fido Software ; Box 77731 ; San Francisco CA 94107, USA ; ; Fido, FidoNet and the dog-with-diskette are U.S. registered ; trademarks of Tom Jennings ; ; If you are doing a new translation, you should use the original ; 'American English' file. Please change the comments to reflect ; any work you've done (such as remove this comment!) ; ; ; CMxx Caller Message; Normal Fido caller messages. This is in it's ; own language file. ; SMxx Sysop Message; Local sysop messages and some log entries. This ; is in it's own language file. ; ;\377 means CR, LF ; ;Everything to the right of a semi-colon ;;; is a comment, and ignored ;by the compiler. ; ;The CMxx and SMxx numbers must start in the left column. Please do not ;change these, though you can rearrange all of the lines, their order ;does not matter. I simply put them in an order convenient to me. ; ;The text (called 'strings') must be completely contained within quotes. ;There are three ASCII characters that have special meanings, and to put them into strings you must perform a magical incantation. ; ; % special format indicator ; \ special format indicator ; " the quote character! ; ;The % is a format control. As the string is processed from left to right, ;it tells Fido that something weird is about to follow. Things like: ; ; ; %d %4d %s %-3d %4,lu ; ;... should be left alone. They indicate places where, at run-time, Fido ;inserts numbers, names, and so on, and control how it is displayed. They are ;in "standard" C-language printf() format (though the %,d format is unique ;to Fido -- it means en-comma-ization, ie. Fido displays the number 1000000 ;as 1,000,000.) ; ; \ is an "escape". It tells Fido that the character or characters that follow ;require special treatment. \ is how you insert control codes and the other ;special character, ", into a string. ; ; \ means "if what follows are digits, it specifies a character value; other ;wise take the next character literally". NOTE: ALL NUMBERS ARE IN OCTAL!!! ;For example: ; ; "\33" a string consisting of one escape character (character ; code 33 octal, 27 decimal) ; "\"" a string consisting of one quote character ; "\15\12" a CR/LF sequence ; ;NUMBERS FOLLOWING \ ARE IN OCTAL!!! BASE 8!!!! NOT DECIMAL OR HEXADECIMAL!!! ; ;Because some control codes are so common, there are abbreviations for them ;predefined. These are: ; ; \r return, 15 octal, 13 decimal ; \n line feed, 12 octal, 10 decimal ; ;There are two control codes that have unalterable meaning to Fido: ; ; 0 NUL, indicates end-of-string ; 377 CR/LF sequence ; ;Do not insert character code 0 (NUL) into strings. NUL indicates end- ;of-string to Fido, you can guess the results. use 377 whenever you need ;a CR/LF (13, 10) sequence; it saves space. (There were nearly 1000 of them ;in the original file -- increasing available work space by nearly 10%) ; ;377 represents a CR/LF sequence. ; ;Basic strings for Caller Message table ; CM0 "North American (CCA)" ;MANDATORY language name CM172 "(Fido Software)" ;who translated this file CM1 "ON" ;UPPER CASE! option enabled, etc CM2 "OFF" ;UPPER CASE! option disabled, etc CM3 "ONCE" ;UPPER CASE! trigger value ; ;These define the YES and NO questions and answers. Note that there are ;two of each; the "default" versions, ie. the value for entering RETURN at ;a yes/no prompt (sometimes it means YES, sometimes NO.) ; ; "q. [Y,n]" "q. [y,N]" "More[Y,n,c]" CM4 "Y" :YES, for default-yes CM5 "y" ;YES, for default-no CM6 "N" ;NO, for default-no CM7 "n" ;NO, for default-yes CM91 "c" ;"continuous" in MORE CM8 "Wait...\377" CM9 "More" ;question for end of page paus CM18 "[" ;highlight "on" (eg. [M]) CM19 "]" ;highlight "off" (eg. [M]) ; ;Basic strings for Sysop Message table ; SM0 "American" ;MANDATORY language name SM163 "(Fido Software)" ;who translated this file SM1 "ON" ;UPPER CASE! option enabled, etc SM2 "OFF" ;UPPER CASE! option disabled, etc SM3 "ONCE" ;UPPER CASE! trigger value ; ;Sysop-language versions of the above. (There is no "C") ; SM4 "Y" :YES, for default-yes SM5 "y" ;YES, for default-no SM6 "N" ;NO, for default-no SM7 "n" ;NO, for default-yes ; ;SHARED -- these are general purpose messages, and used in ;more than one place. ; SM10 "! Can't create file \"%s\"\377" ;Sysop "can't create" error ;LM39 "! Can't create file \"%s\"\377" ;Logfile "can't create" error CM151 "SORRY! Can't create file \"%s\"; can't continue.\377" ;Caller... SM115 "! Disk full writing file \"%s\"" ;"disk full" for sysops ;LM16 "! Disk full writing file \"%s\"" ;log file CM68 "SORRY! The disk is full; can't continue.\377" SM28 "! Can't find file \"%s\"\377" ;Sysop can't find file ;LM31 "! Can't find file \"%s\"\377" CM23 "SORRY! Can't find file \"%s\"; can't continue.\377" CM35 "Command (?=help): " ;universal command prompt CM103 "(?=help): " ;Message Section/Bulletin prompt CM36 "'%c' is not a command\377" ;is-not-a-command error CM21 "PATH OVERRIDE: %s\377" ;used in MESSAGE and FILE areas CM83 "Control-S to pause, Control-C to abort,\r\nStrike any key to start: " ;C)ontinuous, T)ype D)ownload A)SCII SM22 " * TaskID: %d\377" ;/I and FidoNet event ;File: DESCFILE.C CM10 "Please describe %-12s: " ;File: LANGUAGE.C SM9 " * Caller Language: %s\377" CM99 "Language Number 0 - 31: [%d]: " ;C)hange - I)interface command CM63 "! Language file \"%s\" is corrupted\377" ;File: FIDOINI.C SM8 " * System Operator Language: %s %s\377" ;program startup SM132 " * Default Caller Language: %s %s\377" ;program startup SM11 " * The Fido system file \"FIDO.SYS\" is missing!\377" SM12 " * You need to run \"SET-FIDO.EXE\" before running \"FIDO.EXE\"\377" ;This is output as a block. SM13 " * The Fido system file \"FIDO.SYS\" doesn't match this \"FIDO.EXE\"\377" SM14 " * program; make sure you have the latest versions.\n\377" SM15 " * FIDO.SYS is from Fido/FidoNet version %d%c\377" SM16 " * This program is Fido/FidoNet version %d%c\377" SM17 " * You must run \"SET-FIDO\" to change Fido/FidoNet program versions\377" SM18 " * System name: %s\377" SM19 " ! Not enough memory to run?!\377" ;upon first startup SM20 " * Async Port: COM%d\377" ;/1, /2, etc SM21 " * Complete previous FidoNet session\377" ;/C SM23 " * Online at %d baud\377" ;/B SM24 " * CD Bit: %d\377" ;/V SM25 " * Text/workspace buffer is %,u bytes\377" ;/? SM26 " * \07/%c doesn't mean anything\377" ;unknown option ;File: BULLETIN.C CM11 "SORRY: None available\377" ;no bulletins found ; ;Bulletin Number 1 - 19 <--- CM118 ;Command (L [M]) (?=help): <--- CM116 (followed by menu, then CM35, "(?=help)") CM118 "PROJECT Number 1 - %d\377" ;prompt part 1 CM116 "Command " ;prompt part 2 ;File: PROMPT.C CM15 "SORRY: Can't help with '%c'; not a command\377" ;when you enter not from the list CM16 "SORRY: Can't help you, the Help file is missing!\377" CM17 "SORRY: Can't help with that\377" ;not in the help file ;File: FILEMENU.C CM20 "SORRY: There are no usable file areas\377" ;upon entry into File Section CM22 "File Section " ;in command prompt CM256 "File Area" ;in command prompt ;File: MAINMENU.C CM32 "Main Section " ;in command prompt CM37 "SORRY: no questionnaire\377" CM38 "Going outside Fido, wait...\377" ;after O)utside CM39 "Can't go outside Fido\377" ;not enabled! CM40 "Exit to DOS, wait...\377" ;after E)xitDOS CM41 "Can't exit to DOS\377" ;not enabled! ;File: FILES.C CM42 "\r\nFound %u matching files\377" ;after L)ocate command CM43 "File Areas:\377" ;A)reas; list of areas CM44 "File Area [%d]: " ;prompt to choose an area CM46 "\r\nSORRY: No Files\377" ;F)iles, missing FILES.BBS CM47 "MISSING " ;file MISSING, F)iles command CM48 "Too many names! \"%s\" ignored\377" ;D)ownload, too many filenames CM173 "doesn't exist" ;D)ownload, file doesnt exist CM49 "\r\n\07You can only do one file at a time!\377" CM50 "Ready to send \"%s\"\377" ;download starts CM51 "\r\n\07SORRY: You don't have enough time left!\377" CM52 "\r\n\07WARNING: You will be disconnected in %d minutes, even if\377" CM53 "the file transfer is not complete. " ;2nd of two line msg CM54 "\07Download limit exceeded!\377" CM55 "Start now, or five Control-X's to abort\377" ;for all except ASCII CM56 "During last file: " ;prefix to CM56-59 CM57 "Doesn't exist\377" ;errors after D)own/U)pload CM58 "Manually aborted\377" CM59 "Timeout or other failure\377" CM60 "Sent %d files, %,lu bytes in %d:%02d (including\377start time), or %,d bytes/sec\377" CM61 "Sent %d files OK\377" CM62 "\r\nUploading not allowed in this area\377" CM63 "\r\nReady to receive \"%s\"\377" CM64 "File transfer must be completed within %d minutes\377" CM66 "Last file attempt failed: " CM67 "Aborted\377" CM68 "The disk is full!\377" CM69 "Already exists\377" CM70 "Timeout or error\377" CM71 "Received %d files OK\377" CM72 "ASCII Text" ;Dont change these! CM73 "ZMODEM" ;They shouldn't even CM74 "KERMIT" ;be in here! CM75 "TELINK" ;they are part of the CM76 "MODEM BATCH" ;protocol-select prompt CM77 "DIETIFNA" ;qhich is hard coded anyways CM78 "XMODEM" CM79 "/CRC" CM80 " transfer\377" ;ie. "XMODEM/CRC transfer" CM81 "\"%s\" is a reserved name\377" ;D)ownload errors CM82 "\r\n\"%s\" doesn't exist\377" CM85 "\r\n\07\"%s\" is not a text file!\377" CM86 "%,u files, " ;prefix to CM87 if > 1 file CM87 "%,lu bytes total, %02u:%02u transfer time\377" ;stats after download CM88 "Control-C, Control-Z, Control-X, or Control-K to stop\n\377" CM89 "\r\nFile contains %,lu characters\377" ;after ASCII upload CM261 "Filename: " CM262 "A)scii, X)modem, XC)modem-CRC,\r\nZ)modem, K)ermit, T)elink (?=help): " ;DONT CHANGE! CM263 "Transfer Type: A X XC Z K T (?=help): " ;DONT CHANGE SELECTIONS!! CM270 "Do you want your text echoed back to you?" ;[y,n] CM45 "Filename(s) to search for: " ;L)ocate command CM65 "Filename: " ;R)aw command CM84 "is too long a filename" ;more download errors CM154 "is a reserved name" CM159 "is not allowed for this transfer type" CM164 "already exists" ;File: LASTUSER.C SM104 " * Updating caller record from \"%s\"\377" ;reading in LASTUSER.BBS ;File: MARKUSR.C SM27 " * Updating caller records\377" ;FidoNet runtime status ;File: SCRIPT.C SM219 "\r\nAbort the script file? (y,n): " ;different than others ;File: MAINCMDS.C CM25 "Change " ;as in "CHANGE Command (?=help)" CM90 "\r\nPersonal Data:\377" ;C)hange command CM92 "Name : %s\377" CM93 "Address : %s\377" CM94 "Password : %s\377" CM95 "Help-Level : " CM96 "All\377" CM97 "Some\377" ;help level settings CM98 "None\377" CM100 "Columns : %u\377" CM101 "Lines : %u\377" CM104 "Interface : " CM105 "Filler-Nulls : %u\377" CM107 "New name, 1 to 3 words [%s]: " ;name change CM108 "Checking the caller list, please wait..." CM109 "\r\nThat name is already used, choose another\377" CM110 "\r\nYour name is now changed to \"%s\"\377" CM111 "New address [%s]: " CM112 "Can't use that as an address\377" ;trying to enter "External Login" CM113 "New password, 1 word [%s]: " CM114 "Help Level: 1=None, 2=Some, 3=All: [%d]: " ;do not change numbers CM115 "Columns on your display: 16 - %d [%d]: " ;do not change numbers CM117 "Lines on your display; 0 - %d (0=no pause) [%d]: " CM119 "Filler characters; 0 - %d [%d]: " CM121 "List of Fido callers\377" ;L)ist command CM12 "Name or part of name to match (CR=all): " CM122 "Triggers: " ;when it lists trigger settings CM123 "complete: " ;part of E)vents CM124 "%4d min: " ;part of E)vents CM125 "No Scheduled Events\377" ;part of E)vents CM258 "Event/Trigger " ;as in "EVENT/TRIGGER Command (?=help)" CM259 "Trigger 1 - 8: " ;File: CHAT.C ;P)age command text CM126 "Operator can't be Paged right now\377" CM127 "No sense paging yourself!\377" CM128 "%s Paging the Operator, hold on..." SM29 "\r\n%s Times On: %u Mins. On: %u 1 - Chat, SpaceBar - Not available\377" CM129 "\r\nOperator is not available.\377" CM130 "\r\n------- Type to/from the Operator --------\377" SM110 "Sysop: Control-Z to terminate.\377" CM131 "\r\n--- Done Typing to/from the Operator ----\377" ;File: MAIL.C ;FidoNet protocol messages SM134 " * " ;DONT CHANGE THE FRx/WVx/etc STUFF!! SM30 " * FR1: Incoming Call at %s\377" SM31 " (Carrier loss or timeout during packet or file)\377" SM32 " * Total connect time was %d:%02d\377" ;after a call SM33 " (No packets prepared)\377" ;Pickup attempt, no mail waiting SM34 " * FR7: PickUp not allowed for %s\377" SM35 " * FR7: Mail already sent to %s\377" SM36 " * FR7: Mail ready for %s to PickUp\377" SM37 " * FR7: No mail waiting for %s\377" SM38 " (Error sending packet or file(s))\377" SM39 " (No password!)\377" ;password required SM40 " (Wrong password \"%s\"!)\377" ;password required SM41 " * WV5: Resync\377" SM42 " * WV5: Failed resync\377" SM43 " * FS3: Waiting for clear line again\377" SM44 " * FS3: Sending TSYNC again\377" SM45 " Packet missing?!\377" ;"cant happen" SM46 " Short packet?!\377" ;"cant happen" SM47 " * FR3: Receiving Mail Packet\377" SM48 " * FR4: Received %d packets (%,lu bytes)\377" SM49 " (Error receiving packet or files)\377" SM50 " * FR5: Receiving (possible) attached files\377" SM51 " (Received %d files (%,lu bytes))\377" SM52 " (Can't create attached-files list \"%s\")\377" ;you are in trouble! SM53 " * WRx: Receiving packets and/or files\377" SM54 " (Received %d packets and %d files (%,lu bytes))\377" SM55 " (Error receiving packets and/or files)\377" ;disk full/etc SM56 " * FR2/WVx: Waiting for sync\377" SM57 " * FR2/WV1: Got YOOHOO\377" SM58 " * FR2/WV2: Got TSYNC" SM59 ", but trying for YOOHOO\377" SM60 " (Sender still in FS2)\377" SM61 " * FR2/WV2: Honoring previous TSYNC\377" ;CM102 is in callers language CM102 "\r\r\r\rSorry, accepting FidoNet mail only, call back later.\r\n\r\r\r\r" SM64 "\r\n * FS0/FS1: Calling %s, \"%s\" %s %s\377" SM65 " * FS2: Initial synchronization\377" SM66 " (Initial synchronization failed)\377" SM67 " Also known as \"%s\"\377" SM69 " * FS8: Attempting Mail Pickup\377" SM70 " (File Request not enabled now)\377" ;FILEREQUEST event type... SM71 " (File Request not honored: Missing file \"%s\")\377" ;FILEREQ.INI missing SM72 " Requested file \"%s\" " ;honoring requests SM73 " TOO MANY FILES!\377" ;(must be hundreds of files) SM74 "is not requestable\377" ;not in FILEREQ.INI SM75 " * FS4: Sending Packet\377" SM76 " (Error sending packet)\377" SM77 " * FS5: Packet sent (%,lu bytes)\377" SM78 " * FS6: Sending (possible) attached files and requests\377" SM79 " * FS7: File attach failed\377" SM80 " * FS7: File attach complete (%u files, %,lu bytes)\377" SM81 " * WSx: Sending packets and files\377" SM82 " (Sent %d packets and %d files (%,lu bytes))\377" SM83 " (Error during send: file attach failed)\377" SM84 " * FS3: Waiting for clear line\377" SM85 " * FS3: Sending TSYNC\377" SM86 " * WS2: Send YOOHOO/TSYNC\377" SM88 " * WS4: WAZOO Protocol\377" SM89 " * FS3: Got TSYNC response, but checking for YOOHOO\377" SM90 " (Possible BBS user-name-prompt echo)\377" SM91 " * FS3: Honoring previous TSYNC\377" SM92 " * SHx: Sending HELLO packet\377" SM93 " * SH5: Try again\377" SM94 " * SH5: Timeout\377" SM95 " * SH5: Debris 0x%02x\377" SM96 " (Send HELLO failed)\377" SM97 " * RHx: Receive HELLO packet\377" SM98 " (Sender still in WS4/WV5)\377" SM99 " Connected to %s, \"%s\"\377" SM100 " * Packet to %s sent\377" SM101 "! Can't allocate a timer! (mail)\377" ;a "cant happen" error! ;File: MAINSTUF.C SM102 "No packets\377" SM103 " Node Tries Cncts Msgs Files Success Try again?\377" SM105 " * Error trying to execute \"%s\"\377" ;F)idoTerm failed? SM153 "(HOLD)" ;packets marked "hold" SM158 "PU." ;packets Picked Up ;File: UNPACKET.C SM106 " * Incomplete packet %s (%d bytes)\377" SM107 "\r\n * Packet from %s\377" SM108 " %d messages\377" SM109 "! Bad received packet \"%s\" renamed to \"%s\"\377" SM111 " from %s" SM112 " ! Incompatible Fido; v9 or earlier!\377" SM113 " ! Message Type %d: Unknown. Aborting packet\377" CM132 "\r\nToo wide!\377" CM133 "Must be one word\377" ;fixed-field entry (password, etc) CM134 "Must be zero or one word\377" CM135 "Must be %d words\377" CM136 "Must be %d to %d words\377" CM120 "Must be %d or more words\377" CM137 "\r\n\07You have %u minutes in which to do something\377" CM138 "\r\n\07Logged off due to inactivity for %u minutes\377" SM116 "Simultaneous Keyboards OFF\377" SM117 "Simultaneous Keyboards ON\377" SM118 "Local Console ON\377" SM119 "Local Console OFF\377" SM120 "Terminate canceled\377" SM121 "Terminate after caller\377" SM122 "Add 2 minutes connect time\377" SM123 "\r\n+-----------------------------------\377" SM124 "%s, %s, %,d baud\377%,d times, on %d:%02d, limit %d:00\377" SM125 " 1 ... Chat 2 ... Clear Limits\377" SM126 "^A ... Type On ^Z ... Type Off (Clears '^T')\377" SM127 "^X ... X caller ^T ... Terminate after\377" SM128 "^O ... Local Off ^N ... Local On\377" SM129 " ^P ... Add 2 minutes\377" SM130 "+-----------------------------------\377" SM131 "Time and Download Limits Cleared\377" CM277 "\r\n\n\07Your time is up!\n\377" CM278 "\r\n\n\07WARNING: logoff now; you will be disconnected within 60 seconds\n\377" CM279 "\r\n\07WARNING: You have %d minutes left\377" ;File: FIDOMAIN.C SM135 " * Performing AutoLogin\377" SM136 " * System free; ^C to return to DOS, ^Z to cancel\377" SM138 " 1 - Quick Login 2 - Local Login\377" ;DONT CHANGE NUMBERS! SM139 " 3 - Scheduled Events 4 - List packets\377" SM140 " 5 - FidoTerm 6 - Reenable \"(complete)\" events\377" SM141 " 7 - Initialize modem ^C - Return to DOS\377" SM142 " * Initializing the modem\377" SM143 " * Fido Active: Waiting for a Call or Event (?=Help)\377" ;File: SCHED.C SM144 "complete: " ;same column width as... SM145 " now: " ;... this and... SM146 "%4d min: " ;... this. SM147 "No Scheduled Events\377" SM114 "Clock keeps changing?!\377" ;"cant happen" error message SM148 " Trig=%d (" ;ie. "Trig=7 (OFF)" ; ^^^^ Fido does this ;File: FIDONET.C SM164 " * FidoNet active (?=help)\377" ;the prompt SM149 " ! Nodelist files missing or wrong version (run MAKELIST.EXE)\377" SM150 "\r\n * Unscheduled Incoming Mail at %s\377" SM152 " * Complete at %s\377\377" SM154 " ! Disk Full while starting FidoNet!\377" SM155 " ! No outgoing mail this event\377" SM156 " ! There is no message area with \"O=FidoNet\" in AREAS.INI; can't run FidoNet\377" SM157 " ! There is no file area with \"O=FidoNet\" in AREAS.INI; can't run FidoNet\377" SM159 " 3 - Scheduled events 4 - List packets\377" ;DONT CHANGE NUMBERS! SM160 " 5 - Call immediately 6 - End this event early\377" SM161 " 7 - Initialize modem ^C - Return to DOS\377" SM162 " * Ending this event early\377" SM165 "\r\n * Event ends at %s\377" SM166 " * FidoNet \"%c\" complete at %s\377\377" SM167 "* Disk full while unpacking! (Or maybe file creation error)\377" SM168 " To recover the messages, make some free room,\377" SM169 " make FidoNet run somehow, then type Control-P;\377" SM170 " Fidonet will unpack the remaining packets.\377" SM171 "\r\nUnattached files:\377" SM172 " totl cnct peak\377" SM173 " Node | trys | cnct | msgs | file | time | KBs | BPS | BPS | Done?\377" ; "---------------+------+------+------+------+------+------+------+------+------\377" ; Columns must align SM175 "\"*\" means there were other packet(s) successfully sent this schedule\377" SM176 "Totals:\377" SM177 " Packets | calls | cncts | msgs | files | KBs | time | pickups\377" SM178 "%14d%% packet success rate\377" SM179 "%14d%% connect success rate\377" SM180 " * No packets sent or picked up\377" SM181 " * IDLE event started at %s (?=help)\377" SM182 SM183 " ^C ... Return to DOS ^P ... Early End this event\377" ;DONT CHANGE SM184 " # Event aborted\377" ;File: LISTNODE.C CM139 "SORRY: No node list!\377" ;File: MDMFUNC.C SM185 "\r\n\nWARNING: THERE IS A SERIOUS PROBLEM!\377" SM186 " Fido/FidoNet can't make the modem go onhook (disconnect). If the\377" SM187 " Carrier Detect light on the modem (probably marked \"CD\") is on,\377" SM188 " then the cable or modem installation is incorrect; please refer to\377" SM189 " the manual. If the \"CD\" light is off, then Fido/FidoNet is installed\377" SM190 " incorrectly. Certain modems do not support the \"CD\" signal properly;\377" SM191 " these modems can't be used with Fido/FidoNet. Please refer to the manual.\377" SM192 " Type Control-C to abort to DOS: \07" SM193 " * WARNING: Modem not responding; check modem installation\377" SM194 " * Aborting dial attempt\377" SM196 " * Attempting a connection\377" SM197 "Unknown result code %d\377" SM198 "Connected at %,d%s" ;File: NODESTUF.C SM199 "! Wrong revision nodelist; run MAKELIST.EXE!\377" SM200 " * Creating new nodemap %s\377" SM201 "\r\n * %s no phone number; Holding for PickUp\377" ;File: ROUTER.C SM202 " * Preparing the nodemap\377" SM203 " * Route file processing complete\377" SM204 "\r\n * Route file %s:\377" SM205 "\r\n! Too many BEGINs at line #%d\377" SM206 "\r\n! Too many ENDs at line #%d\377" SM207 "\r\n! Unknown word \"%s\"\377" SM208 "\r\n! No such node \"%s\", line #%d in %s\377" SM210 "\r\n! There is no node %s\377" SM211 "\r\n! There is no net host %s\377" SM213 "\r\n! There is no zone host %s\377" SM215 "\r\n! There is no node %s\377" SM151 "\r\n! ERRORLEVELs must be 3 to 255\377" ;File: USUPPORT.C CM140 CM141 " Total Limit Remaining\377" CM142 "Total Calls: %6ld\377" CM143 "Your Calls: %4d\377" CM144 "Connect Time: %4d %4d %4d\377" ;keep this table CM145 "24 Hr Time Limit: %4d %4d\377" ;lined up! (good CM146 "Credit: %7s %7s\377" ;luck!) CM147 "Disk Space: %4ld%c %4ld%c\377" CM148 "Downloaded: %4d%c\377" ; CM149 "24 Hr Dnld Limit: %4dK %4dK\377" CM150 "Uploaded: %4ld%c\377" CM152 "Logging %s off at %s\377" ;after G)oodbye CM267 "Subdirectory doesn't exist; create it now?" ;[y,n] CM268 "Leave a message to the system operator?" ;[y,n] CM269 "Do you want to continue?" ;[y,n] CM264 "Enter pathname: " ;O)verride command ;File: MARKMSG.C SM209 "(IN TRANSIT); Killed\377" ;see MSGMENU.C SM212 "(KILL/SENT); Killed\377" SM214 "(SENT)\377" ;File: MSGMENU.C CM153 "SORRY: There are no usable message areas\377" CM106 "Can't enter or modify messages in this area\377" ;AREAS.INI "O=ReadOnly" CM155 "Total messages: %4u\377" ;before command prompt CM156 "Highest message: %4u\377" ;when area is selected CM157 "Highest read: %4u\377" CM254 "FidoNet Message Area" ;part of command prompt CM255 "Message Area" ;part of command prompt CM158 "Message Section " ;in command prompt CM160 "[No Messages Yet] " ;command prompt, empty msg area CM161 "Command, Message Number 1-%u [%d %c]: " ;command prompt CM162 "No such message\377" CM163 "No message to you found\377" ;T)o-You command CM167 "Pattern to search for: " ;S)earch command CM168 "Not found\377" CM169 "Not your message!\377" CM170 "Appending to existing file\377" CM13 "File to write to [CR=Buffer]: " ;W)rite command CM174 "Wrote %d lines\377" ;W)rite-Buffer CM175 "\r\n(PRIVATE) message\377" CM176 "\r\nThere is no message #%d\377" CM177 "Message Areas:\377" ;A)rea-change command CM178 "Message Area [%d]: " ;A)rea prompt CM179 "\r\nLowest Message\377" CM180 "\r\nHighest Message\377" CM181 "Already sent, no credit\377" ;K)ill CM182 "You recovered %s\377" CM183 "Message %u deleted\377" CM184 "From: %s" ;displayed message; note CM185 "To: %s" ;widths are the same CM186 "Is Reply To #%u " CM187 "See Also #%u" CM188 "File(s): %s\377" CM189 "Subj: %s\377" CM245 "(PRIVATE) " CM246 "(SENT) " ;as displayed when CM247 "(RECV'D) " ;L)isting or reading CM248 "(FILE(S) ATTACHED) " ;messages CM249 "(FILE(S) REQUESTED) " CM250 "(IN TRANSIT) " CM251 "(ORPHAN) " CM252 "(KILL/SENT) " ;File: MSEND.C CM190 "SORRY: Not enough memory!\377" ;EDIT:S)ave CM191 "Loaded %d lines of text\377" ;EDIT:R)ead CM192 "WARNING: The message may be missing lines; there\377" ;U)pdate msg #1 CM193 "was not enough memory to edit the entire message\377" ;U)pdate msg #2 CM194 "You may now display and edit message #%d\377" ;U)pdate CM195 "[NOTE: Message modified" CM196 "This will be message #%u\377" CM197 "Maximum message length, lines: %d\377" CM198 "Enter your message, blank line to end\377" CM199 "Words will wrap automatically\377" CM200 "Message aborted\377" CM201 "Message is full\377" CM202 "No lines to delete!\377" CM203 "Old string: " CM204 "New string: " CM205 " Can't find \"%s\"\377" CM206 "Saving your message\377" CM207 "Read text from message buffer\377" CM208 "\"%s\" doesn't exist!\377" CM209 "The quote buffer is empty\377" CM211 "From: [%s]\377" CM212 "REPLY To: " CM213 "To: " CM214 "Messages must be addressed \"To:\" someone\377" CM215 "Messages must have a destination node address\377" CM217 "Messages must have a \"Subject:\"\377" CM218 "(System operator can read (PRIVATE) messages)\377" CM216 "Subj: " ;S)ubject CM219 "File(s) to request: " ;r)equest file CM220 "Full pathname(s) to send: " ;a)ttach file CM221 "%s line number: " ;line-number prompt CM165 "Insert new text before" ;arg to %s in CM221 CM166 "Delete" ;arg to %s in CM221 CM171 "Edit" ;arg to %s in CM221 CM222 "Line numbers must be 1 to %d\377" CM210 "You can't modify that line\377" CM224 "\r\n\07SORRY: DISK FULL! Can't save your message!\377" CM226 "Adding a reply to msg #%u\377" CM227 "Msg #%u already has reply msg #%u\377" CM228 "Oh no! Message #%u points to itself!\377" CM229 "Current Net is " CM230 "Z)one N)et F)ido (or numeric FidoNet address) (?=help): " ;Cmd names are hardcoded... CM231 "SORRY: There are no other Zones defined\377" CM232 "There is no Zone %d\377" CM233 "SORRY: There are no other Nets defined\377" CM234 "There is no Net %d in Zone %d\377" CM235 "There is no node %s\377" CM236 "You do not have enough credit\377" CM237 "Can't find list of nodes %s\377" CM271 "Throw this message away?" ;[y,n] CM272 "Prefix each line with \">\"?" ;[y,n] CM273 "Force word-wrap of paragraphs?" ;[y,n] CM274 "Use alias %s?" ;[y,n] CM275 "Kill after sending?" ;[y,n] CM276 "Private?" ;[y,n] CM265 "Edit " ;as in "EDIT Command (?=help)" CM14 "File to read from [CR=Buffer]: " CM24 "Message-File " ;as in "MESSAGE-FILE Command (?=help)" CM26 "Choose a F)idoNet node: " CM27 "Choose a Z)one: " CM28 "Choose a N)et: " ;File: PACKET.C SM216 "\r\n * Packet for %s %s\377" SM137 " * Recreating modified packets\377" SM220 " * Adding new messages to existing packets\377" SM221 " Orphan message #%d from %s destined for %s\377" SM222 " * Searching for nodes to Poll\377" SM223 " * Checking for outgoing messages\377" SM226 " Msg #%u from %s to %s\377" SM62 " File(s): %s\377" SM68 " None\377" ;File: SIGNON.C SM87 " * Cant AutoLog record #%d\377" CM29 "Your FIRST name: " CM30 "Your LAST name: " CM31 "Enter your COMPANY NAME please: " CM33 "Choose a password: " CM34 "Password: " SM133 " * No Caller file (CALLER.SYS), creating a new one\377" CM238 "Wrong!\377" SM217 "bad -- 'A' to '%c' only\377" SM218 "not specified\377" CM239 "SORRY: The system has become unavailable\377" CM240 "NOTE:\r\n The system will be unavailable in %u minutes\377" CM241 "You have been on for %d minutes in the last 24\377" CM242 "hours, exceeding the daily limit of %d minutes.\377" CM243 "In 24 hours you will be allowed back on, with \377" CM244 "the full limit of %d minutes per day.\377" CM280 "FidoNet address %s\377" CM253 "WARNING:\r\nThere is an event pending right now\377"